Ohaus Advanced Dry Block Heaters

Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the five models accepts separate interchangeable modular blocks, accommodating various tube sizes from 0.2 mL micro-tubes to 50 mL centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention. Heaters require OHAUS modular heating blocks for operation. Modular blocks are sold separately.

Operating Features:

Microprocessor Control: PID temperature control, with optional external RTD probe, offers a temperature stability as low as ± 0.1°C with a temperature uniformity as low as ± 0.1°C. Samples are heated to temperature quickly and accurately. Temperature is adjusted in ± 0.1°C increments.

LED Display: Touch pad controls with easy-to-read, independent LED displays for temperature, and time. Provides repeatable and accurate results every time and is easily visible across lab benches. Shows set-point and actual temperature. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off.

Temperature Calibration Mode: Allows user to calibrate unit to an external temperature device.

Safety Features:

Caution Hot Indicator: Hot warning symbol light is illuminated when the temperature is above 40°C.

Overshoot Protection: If the unit exceeds the set temperature by 10°C the unit will automatically stop heating.

Audible Alarm: In timed mode, alarm will sound when time reaches zero and when unit reaches set-point temperature. CAUTION! To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator.

Operating Conditions: Units can be run in conditions from 18 to 33°C (64 to 91°F), 20% to 80% relative humidity, non-condensing.

 HB1DGHB2DGHB4DGHB6DG
Size1 Block2 Blocks4 Blocks6 Blocks
Dimensions31.5 × 20.3 × 8.9 cm39.1 × 20.3 × 8.9 cm42.9 × 20.3 × 8.9 cm53.1 × 20.3 × 8.9 cm
Temperature RangeAmbient +5°C to 120°C
Uniformity in Block at 37°C120 volt units:
± 0.1°C
230 volt units:
± 0.2°C
Temperature Stability @ 37°C120 volt units: ± 1.0°C
230 volt units: ± 1.5°C
Uniformity Across
Similar Blocks @ 37°C
N/A± 0.1°C± 0.2°C± 0.3°C
Heat Up time to 100°C45 minutes50 minutes60 minutes65 minutes